Project

General

Profile

Actions
Copy link

Bug #3361

open
JJ CM

LED not functioning as per the requirements

Bug #3361: LED not functioning as per the requirements

Added by Jagatheswaran J 2 days ago. Updated about 3 hours ago.

Status:
In Progress
Priority:
Normal
Assignee:
Channamallikarjuna Mattihalli
Target version:
-
Start date:
09/03/2026
Due date:
% Done:

90%

Estimated time:
Severity:
Minor

Description

Requirements -Status Indicators

1. LED1 – Red (Power Status)

Device Power ON – ON

Device Power OFF – OFF

2. LED2 – Orange (4G Status)

Data Posting to Server – Orange Blink

Network Failure / Socket Not Connected – OFF

Network OFF – Orange Blinking Continuously

3. LED3 – Green (USB Status)

USB Connected to Tool – ON / Green Blink

Data Transfer – Green Blinking

Config Tool Disconnected – OFF

4. LED4 – Blue (Modbus Status)

Modbus Data Reading – Blue Blink

LAN Cable Connected – ON

LAN Cable Disconnected – OFF

Socket Error – Blinking Continuously

During device booting, all LEDs will blink 5 times.

SV Updated by Sunder Venugopal about 3 hours ago Actions
Copy link
 #1

  • Status changed from New to In Progress

JJ Updated by Jagatheswaran J about 3 hours ago Actions
Copy link
 #2

  • Subject changed from LED notfunctioning as per the requirements to LED not functioning as per the requirements
  • % Done changed from 0 to 90

The issue has been fixed. It needs to be verified again after code integration.

Actions
Copy link

Also available in: PDF Atom